top of page

Group

Public·19 members

SolidWorks 2018 Activator: The Best Sources and Steps to Activate SolidWorks 2018




SolidWorks 2018 Activator [Extra Quality]




SolidWorks is one of the most popular computer-aided design (CAD) and computer-aided engineering (CAE) software in the world. It allows users to create, simulate, optimize, and manufacture 3D models for various applications such as product design, mechanical engineering, electrical engineering, industrial design, and more.




SolidWorks.2018.Activator [Extra Quality]



SolidWorks 2018 is the latest version of this software that was released in October 2017. It offers many new features and enhancements that improve the user experience, performance, quality, and productivity of 3D design and engineering.


However, SolidWorks 2018 is not a free software. It requires a valid license to run and access its full features and capabilities. A license can be purchased from an authorized reseller or obtained through a subscription service. But what if you want to use SolidWorks 2018 without paying for a license? Is there a way to activate SolidWorks 2018 for free?


This is where an activator comes in. An activator is a software tool that can bypass the license verification process and enable you to use SolidWorks 2018 without a valid license. Sounds tempting, right? But before you decide to use an activator, you should know what it is, how it works, and what are the risks and benefits of using it. In this article, we will cover all these aspects and help you make an informed decision.


SolidWorks 2018 Features and Benefits




SolidWorks 2018 is a powerful and comprehensive software that can help you create, simulate, optimize, and manufacture 3D models for various applications. It has many features and benefits that can enhance your design and engineering workflow, such as:


3D Design and Simulation




SolidWorks 2018 enables you to create, validate, and optimize 3D models with powerful tools and realistic visualization. You can sketch, model, assemble, and document your designs with ease and accuracy. You can also perform various types of analysis, such as stress, thermal, fluid, motion, fatigue, etc., to test your designs under different scenarios and conditions. You can also use advanced features such as parametric modeling, direct editing, freeform modeling, reverse engineering, generative design, topology optimization, etc., to create complex and organic shapes and optimize your designs for performance and manufacturability.


Collaboration and Data Management




SolidWorks 2018 supports teamwork and file sharing with integrated solutions and cloud services. You can collaborate with your colleagues, customers, suppliers, and partners on the same platform and access your data anytime, anywhere. You can also manage your data securely and efficiently with SolidWorks PDM (Product Data Management), which allows you to control versions, revisions, permissions, workflows, etc., of your files. You can also use SolidWorks Manage (Project and Process Management), which allows you to plan, execute, monitor, and report on your projects and processes.


CAM and Inspection




SolidWorks 2018 simplifies machining and quality control with intelligent and automated features. You can use SolidWorks CAM (Computer-Aided Manufacturing), which is powered by CAMWorks, to generate NC (Numerical Control) tool paths for your parts based on rules-based machining and automatic feature recognition. You can also use SolidWorks Inspection (Quality Control), which supports MBD (Model-Based Definition), to create inspection documents and reports based on your 3D models.


SolidWorks 2018 System Requirements and Recommendations




To run SolidWorks 2018 smoothly and efficiently on your computer, you need to meet certain hardware and software requirements. These requirements depend on the complexity of your models, the features you use, the operating system you have, etc. Here is a summary of the minimum and recommended requirements for running SolidWorks 2018:


Operating System




SolidWorks 2018 supports Windows 10 or Windows 7 (64-bit) operating systems. Windows Home editions are not supported.


Processor




The minimum processor speed required for SolidWorks 2018 is 3 GHz or higher. The recommended processor type is Intel Core i5 or i7 or equivalent AMD.


RAM




The minimum RAM size required for SolidWorks 2018 is 8 GB or more. The recommended RAM size is 16 GB or more.


Graphics Card




The minimum GPU RAM size required for SolidWorks 2018 is 2 GB or more. The recommended GPU RAM size is 4 GB or more. The recommended graphics card brand is NVIDIA Quadro or NVIDIA GeForce with at least NVIDIA Kepler chip.


Drive




The minimum disk space required for SolidWorks 2018 is 2 GB or more. The recommended disk space size is 5 GB or more. The recommended drive type is SSD (Solid State Drive). SolidWorks 2018 Activator: What It Is and How It Works




An activator is a software tool that can bypass the license verification process and enable you to use SolidWorks 2018 without a valid license. It works by modifying or replacing some files or registry entries of the software, or by generating a fake serial number or activation code that can fool the software into thinking that it is licensed.


Using an activator may seem like an easy and convenient way to use SolidWorks 2018 for free, but it also comes with some risks and drawbacks. Some of them are:


  • It is illegal. Using an activator violates the terms of service and intellectual property rights of the software developer. You may face legal consequences if you are caught using an activator.



  • It is unsafe. Using an activator may expose your computer to malware or viruses that can harm your system or steal your data. You may also lose your warranty or technical support from the software developer if you use an activator.



  • It is unreliable. Using an activator may cause some errors or bugs in the software that can affect its performance or functionality. You may also miss some updates or patches that can improve the software or fix some issues.



Therefore, using an activator is not recommended and not worth the risk. If you want to use SolidWorks 2018 legally and safely, you should buy a legitimate license from an authorized reseller or use a free or open source software that has similar functionality to SolidWorks.


Types of Activators




There are different types of activators that can be used to activate SolidWorks 2018. Some of them are:


  • Crack: A crack is a modified version of the original software file that can bypass the license verification process. A crack usually replaces the original file with a modified one, or adds a new file that can override the original one.



  • Patch: A patch is a small program that can modify some parts of the original software file to bypass the license verification process. A patch usually changes some bytes or instructions of the original file, or inserts some code that can disable the license verification process.



  • Keygen: A keygen is a program that can generate a fake serial number or activation code that can be used to activate the software. A keygen usually uses some algorithm or formula to create a valid serial number or activation code based on some input, such as the user name, hardware ID, etc.



  • Loader: A loader is a program that can load another program into memory and execute it without installing it on the disk. A loader usually loads a modified version of the software into memory and runs it from there, bypassing the license verification process.



Sources of Activators




There are different sources of activators that can be found on the internet. Some of them are:


  • Torrent sites: Torrent sites are websites that allow users to share files using peer-to-peer (P2P) networks. Torrent sites usually have a large collection of activators for various software, but they also have a high risk of malware or viruses.



  • Forums: Forums are online platforms where users can discuss various topics and share information. Forums may have some threads or posts where users share links to activators for various software, but they may also have some fake or broken links.



  • Blogs: Blogs are websites where users can publish their opinions, experiences, or knowledge on various topics. Blogs may have some articles or reviews where users share links to activators for various software, but they may also have some outdated or unreliable links.



Steps to Use an Activator




The steps to use an activator may vary depending on the type and source of the activator, but they usually follow this general guide:


  • Download the activator from a reliable source. Make sure you scan it with an antivirus program before opening it.



  • Extract the activator from the compressed file if necessary. Make sure you have enough disk space and permission to extract it.



  • Run the activator as administrator if necessary. Make sure you follow the instructions or prompts provided by the activator.



  • Restart your computer if necessary. Make sure you save your work and close all programs before restarting.



  • Launch SolidWorks 2018 and check if it is activated. Make sure you have internet connection and firewall settings that allow SolidWorks 2018 to run properly.



Conclusion




In this article, we have discussed what SolidWorks 2018 is, what an activator is, and why someone might want to use it. We have also covered the features and benefits of SolidWorks 2018, the system requirements and recommendations for running it, the types and sources of activators, and the steps to use an activator.


We have learned that SolidWorks 2018 is a powerful and comprehensive software that can help you create, simulate, optimize, and manufacture 3D models for various applications. It has many features and benefits that can enhance your design and engineering workflow, such as 3D design and simulation, collaboration and data management, CAM and inspection, and more.


We have also learned that an activator is a software tool that can bypass the license verification process and enable you to use SolidWorks 2018 without a valid license. It works by modifying or replacing some files or registry entries of the software, or by generating a fake serial number or activation code that can fool the software into thinking that it is licensed.


However, we have also learned that using an activator is not recommended and not worth the risk. It is illegal, unsafe, and unreliable. It violates the terms of service and intellectual property rights of the software developer, exposes your computer to malware or viruses, causes errors or bugs in the software, and prevents you from getting updates or patches. If you want to use SolidWorks 2018 legally and safely, you should buy a legitimate license from an authorized reseller or use a free or open source software that has similar functionality to SolidWorks.


We hope this article has been helpful and informative for you. If you have any questions or comments, please feel free to leave them below. Thank you for reading!


FAQs




Here are some frequently asked questions about SolidWorks 2018 and activators:


Q1: Is SolidWorks 2018 compatible with Windows 10?




A1: Yes, SolidWorks 2018 is officially supported on Windows 10, 64-bit version.


Q2: How much does SolidWorks 2018 cost?




A2: The price of SolidWorks 2018 depends on the package you choose (Standard, Professional, or Premium) and the license type (perpetual or subscription). The average price range is between $4,000 and $10,000 per license.


Q3: Is using an activator illegal?




A3: Yes, using an activator is illegal because it violates the terms of service and intellectual property rights of the software developer. You may face legal consequences if you are caught using an activator.


Q4: What are the alternatives to using an activator?




A4: The alternatives to using an activator are buying a legitimate license from an authorized reseller or using a free or open source software that has similar functionality to SolidWorks.


Q5: Where can I find more information about SolidWorks 2018?




A5: You can find more information about SolidWorks 2018 on the official website ([text]), the blog ([text]), the YouTube channel ([text]), or the help page ([text]). dcd2dc6462


About

Welcome to the group! You can connect with other members, ge...
bottom of page